Q1. 🤔 What exactly is Nano Scratch Compound, and what does it do?
➤ A1. 🧪 Nano Scratch Compound is a ceramic-infused corrective paste designed to remove light scratches, swirl marks, oxidation, and sanding haze while restoring a deep, glossy finish in a single step.
➤ Unlike regular rubbing compounds that only cut the paint, this formula is engineered to Cut + Polish + Enhance Gloss simultaneously, with SiO₂ (ceramic) infusion to add an extra protective boost.
It works by:
• Using micro-abrasives to level micro defects in the clear coat
• Smoothing the surface to reduce visible scratches & swirls
• Leaving behind a rich gloss with better clarity and colour depth
• Preparing the surface for ceramic sprays, sealants, or coatings
➤ It’s ideal for anyone who wants professional-grade correction without a complicated, multi-step process.
Q2. 🧼 Do I need to prep the surface before using Nano Scratch Compound?
➤ A2. 🧤 Yes — surface preparation is very important.
➤ For best results and to avoid micro-marring:
• Wash the vehicle thoroughly to remove dust, dirt, and road film
• Dry fully with a clean microfiber towel
• Mandatory: Perform a small patch test in a hidden area to check paint compatibility and finish.
• For best safety and performance, we highly recommend using a clay bar first to remove embedded contaminants.
✔ A clean, contaminant-free surface ensures:
• Better correction
• Less risk of new micro-scratches
• Stronger bonding of the ceramic-infused layer
Q3. 🪵 What kind of scratches can this product fix — and what can it NOT fix?
➤ A3. 🔍 Nano Scratch Compound is designed for clear coat and painted surface correction, and works best on:
➤ ✅ Can help reduce or remove:
• Light to moderate swirl marks
• Wash-induced micro-scratches
• Light key marks that haven’t cut through the clear coat
• Oxidation and dull/hazy patches
• Light sanding marks (e.g., 2000–3000 grit refinishing)
❌ Cannot fully fix:
• Scratches where metal or primer is visible
• Deep cuts you can feel with your fingernail
• Cracked, peeling, or flaking clear coat
• Stone chips / deep gouges
➤ In such cases, repainting or touch-up paint is required. The compound can still soften the visual impact, but it cannot replace missing paint.
Q4. ⚙️ Can I use it by hand, or do I need a machine polisher?
➤ A4. 🧽 You can use it both ways — by hand or with a machine.
🔹 By Hand (DIY Friendly):
• Use a microfiber or foam applicator pad
• Work in small sections (about 2 x 2 ft panel)
• Apply firm, controlled pressure in circular or cross-hatch motion
• Wipe and inspect, repeat if needed
Best for:
• Scratches & Swirls
• Localised marks (around handles, edges, etc.)
• Users without machine polishers
🔹 By Machine (Professional-Level Results):
• Compatible with Dual Action (DA) and Rotary polishers
• Use a foam, microfiber, or wool pad (depending on defect level)
• Start at low speed, gradually increase for controlled correction
Best for:
• Full-panel or full-car correction
• Removing sanding marks
• Heavier swirl or oxidation removal
➤ For deeper or larger defects, machine use is recommended for faster, more consistent results.
Q5. ⏱️ How many times can I use Nano Scratch Compound on the same panel? Will it thin the clear coat?
➤ A5. 🛡️ All abrasive compounds work by removing a very thin layer of the clear coat, and that’s how they level scratches and swirl marks. However, Nano Scratch Compound uses refined micro-abrasives, designed to remove only the minimum material needed for correction—making it safer for both beginners and professionals.
• For typical light correction, 1–2 passes on a panel are generally safe when used correctly.
• On modern clear coats, occasional use for maintenance correction (once or twice a year) is normal.
➤ ✔ Important safety notes:
• Do not over-polish the same area repeatedly in one session.
• Always monitor the heat and paint behaviour.
• For very thin, older, or repainted panels, be extra cautious.
• If unsure, consult a professional detailer or use lighter pressure + fewer passes.
Used as directed, it is safe for long-term, responsible use on well-maintained vehicles.
Q6. ☀️ Is this product safe and effective for Indian climate and conditions?
➤ A6. 🇮🇳 Absolutely — it’s formulated with Indian conditions in mind.
➤ It is built to perform well under:
• High heat & UV exposure
• Humidity and monsoon conditions
• Urban dust, pollution, and frequent washing
➤ The SiO₂-infused layer provides better resistance against:
• Oxidation
• Loss of gloss
• Some impact of UV fading
➤ For maximum protection, we recommend topping the corrected surface with:
• Pinnacle Scrub Coating or Hybrid PTFE Coat
• Instant Ceramic Spray / Blue Vibes Ceramic Gloss Spray
➤ This creates a strong protection system that is more resistant to Indian climate extremes.
Q7. 🎨 Will Nano Scratch Compound change my car’s colour or leave white residue in gaps or trims?
➤ A7. ✨
• No, it will not change your car’s colour. It enhances existing colour depth and clarity by smoothing the surface.
• The product is body-colour safe and designed to work on OEM and high-quality repaints.
To avoid residue issues:
• Avoid heavy loading near rubber or plastic trim
• Use masking tape on sensitive areas if you’re working aggressively
• If residue enters gaps, remove it immediately using a detailing brush or microfiber cloth
➤ Used correctly, it will enhance gloss and colour richness without staining.
Q8. 🔄 How often should I use Nano Scratch Compound? Is it for daily maintenance?
➤ A8. ⏳ Nano Scratch Compound is a correction product, not a daily cleaner.
➤ Recommended usage frequency:
• Full correction detail: Once or twice a year (depending on vehicle condition)
• Spot correction: As needed (for new scratches, swirl marks, etc.)
➤ For routine maintenance and gloss (instead of constant compounding), use:
• Instant Ceramic Spray / Blue Vibes Ceramic Gloss for regular wash-after protection
• pH-neutral Nanotech ceramic shampoos to preserve gloss and coating
➤ This way, Nano Scratch Compound is only used when defects appear, not every time you wash.
Q9. 💡 What makes this Nano Scratch Compound different from regular rubbing compound or polish?
➤ A9. 🏆 Several key differences set it apart:
➤ Tri-Ceramic Infusion + SiO₂
o Not just a cutting compound—also adds a ceramic-like protective boost.
➤ One-Step Cut + Polish + Gloss
o Traditional systems use multiple products:
▪ Heavy Cut → Medium Polish → Finishing Polish
o Nano Scratch Compound is engineered to reduce steps and deliver a corrected + glossy finish in fewer passes.
➤ Low Dusting, No Filler, Silicone-Free
o No fake shine from fillers
o You see the true correction, not a temporary mask
➤ DIY + Pro Friendly
o Works for home users with no machine, and professionals who need fast, dependable results.
➤ Indian Climate Ready
o Tailored for heat, humidity, dust, monsoon, and frequent wash cycle conditions.
In short:
👉 It’s not just a compound. It’s a modern correction system designed to be faster, smarter, and more protective than old-school rubbing compounds.
