🧪 Contents & Cautionary Warning
⚠️ (Flammable) Contains ceramic-infused polymer blend with multi-cleaning agents.
- * Patch test is mandatory before use. Harmful if swallowed. May cause skin/eye irritation. Avoid inhaling vapours or overspray. Apply only on cool, dry, contamination-free surfaces. Avoid hot surfaces and direct sunlight.
- Keep away from heat, flame, sparks, or ignition sources. Store in a well-ventilated, cool, dry place.
- Keep out of the reach of children and pets.
- Do not smoke, eat, puncture, or incinerate container. Mishandling may cause hazardous reactions or combustion.
⚠️ Disclaimer – *Terms & Conditions Apply
Use of this product constitutes acknowledgement and acceptance of Smarticon's Terms & Conditions, Safety Instructions, Risk Policy, Disclaimer, and applicable *SOPs available through the product label, QR code, or our official website.
Reviewing and understanding all product information before purchase and use is mandatory. Failure to review or follow the recommended Smarticon *SOP, safety instructions, compatibility guidance, storage requirements, maintenance recommendations, or application procedures may result in improper use, reduced performance, incompatibility, unsafe application, damage, or other unintended outcomes, for which the user accepts responsibility.
This product is intended only for its designated purpose and compatible surfaces. A compatibility patch test is mandatory before full application. Product performance, durability, appearance, compatibility, suitability, and results may vary depending on surface condition, environmental exposure, user technique, maintenance practices, storage conditions, and other factors beyond Smarticon's reasonable control.
Smarticon shall not be responsible for loss or damage arising from misuse, improper application, failure to perform a mandatory patch test, failure to follow the recommended *SOP or safety instructions, use on incompatible, unsuitable, aged, modified, defective, or previously treated surfaces, improper storage, unauthorised product modification, or use outside the product's intended purpose.
Nothing contained in any advertisement, catalogue, brochure, website, social media content, demonstration, recommendation, illustration, photograph, or verbal communication shall modify, expand, or override the official Smarticon Product Label, Safety Instructions, Master Legal Disclaimer, or applicable **\***SOP.*
By purchasing, opening, handling, applying, distributing, recommending, or using this product, the user:
- Accepts responsibility for verifying product suitability before use.
- Accepts responsibility for safe handling, application, storage, and ongoing maintenance.
- Agrees to comply with all Smarticon instructions, warnings, and *SOP requirements.
- Agrees that any dispute, claim, or remedy shall be governed by these Terms & Conditions and applicable law.
- Agrees that Smarticon's liability, where legally established, shall be limited to the maximum extent permitted by applicable law and, where permitted, shall not exceed the original purchase price of the product.
- Acknowledges that Smarticon shall not be responsible for indirect, incidental, consequential, special, reputational, commercial, or third-party losses arising from product use, except where liability cannot legally be excluded.
🛡️ Universal Product Compatibility & User Responsibility Notice
Every Smarticon product is engineered for its intended application; however, surfaces, substrates, coatings, materials, environmental conditions, maintenance history, storage conditions, and user application techniques may vary significantly. *A compatibility patch test is mandatory before full application on every surface.
By purchasing, opening, handling, applying, or distributing this product, the user acknowledges sole responsibility for verifying suitability for the intended application and agrees to follow the latest Smarticon **\***SOP, safety instructions, maintenance guidance, storage recommendations, and compatibility requirements available through our official website or QR code.
Performance, durability, appearance, and results may vary depending on substrate condition, environmental exposure, application method, maintenance practices, and other factors beyond Smarticon's reasonable control.
To the fullest extent permitted by applicable law, Smarticon's responsibility, where legally established, shall be limited to the purchase value of the product only. Smarticon shall not be responsible for damage to treated surfaces, vehicles, optical equipment, electronic devices, household items, industrial equipment, third-party property, consequential loss, loss of use, business interruption, financial loss, or other claims arising from incompatibility, incorrect application, improper handling, failure to perform a mandatory patch test, failure to follow the Smarticon *SOP, misuse, modification, storage outside recommended conditions, or use beyond the product's intended purpose, except where liability cannot legally be excluded.
🌍 Universal Performance & Maintenance Notice
Professional detailing, protection, cleaning, restoration, maintenance, and surface-care products require correct preparation, application, compatibility verification, periodic maintenance, and appropriate environmental conditions to achieve optimum results. Individual performance may vary depending on surface condition, age, previous treatments, exposure, user technique, maintenance frequency, storage practices, and environmental factors. Users are recommended to perform regular maintenance in accordance with the applicable Smarticon **\***SOP to help maintain optimum appearance, performance, and service life. Failure to maintain the product in accordance with the recommended Smarticon SOP may reduce performance, durability, appearance, or functionality and shall not constitute a product defect.
No statement, illustration, photograph, demonstration, marketing material, recommendation, testimonial, or verbal communication shall override, modify, or replace the official Smarticon SOP, Safety Instructions, Terms & Conditions, or this Master Legal Disclaimer.
🚨 Emergency Response Protocol
- Swallowed: Do not induce vomiting. Seek emergency help immediately
- Skin contact: Remove contaminated clothing. Wash with soap and water
- Eye contact: Rinse thoroughly with water. Remove contact lenses
- Inhalation: Move to fresh air. Seek help if symptoms persist
- Fire: Use CO₂, foam, or dry powder extinguishers—never water
🧪 Safety Priority – *SOP Compliance is Mandatory
- ✔ Shake well before use
- ✔ Use in a ventilated area
- ✔ Avoid ingestion, inhalation, or contact
- ✔ Wear PPE (gloves, goggles, mask, apron)
- ✔ Wash hands thoroughly
- ✔ Perform patch test
- ✔ Dispose responsibly as per local laws
- ✔ Store away from heat, flame, or sunlight
⚖️ Legal Waiver & Limitation of Liability
Smarticon is not liable for any incident, injury, or damage resulting from:
- Misuse or unauthorized application
- Ignoring safety instructions or **\***SOPs
- Use on aged, damaged, or incompatible surfaces
- Expired or tampered product
- DIY chemical mixes or combinations
- Allergies, health issues, or undesired outcomes
This applies to:
- Consumers (B2C), households, professionals
- Dealers, vendors, retailers, applicators
- OEMs, exporters, and B2B clients
- Reviewers, influencers, and smear campaigns
🌪️ Force Majeure – Act of God & Natural Calamity Exclusion
Smarticon shall not be held liable for damages caused by:
- Natural disasters (flood, cyclone, quake, etc.)
- War, terrorism, pandemic, lockdowns
- Power cuts, shipping failures, or misuse outside our control
🚘 Home, Auto, and Multi-Surface Disclaimer
Smarticon holds no liability for visible or invisible effects on any kinds of surfaces treated:
- Vehicle paint, PPF, rubber, leather, plastic, wires, engine, or trims
- Household fabrics, furniture, curtains, appliances
- Metals, glass, wood, gloss, or matte surfaces
Performance, durability, appearance, compatibility, and results may vary depending on:
- Surface condition, application technique, product compatibility, and environmental factors
These are beyond Smarticon’s control.
📦 Product Category Applicability
This disclaimer applies to all Smarticon SKUs, including:
- ✔ Automotive: Coatings, cleaners, dressings, wiring, polishes, sensors
- ✔ Home Care: Serums, sprays, protectants
- ✔ Industrial: Degreasers, sealants, lubricants, protectives
🔬 Technical Language Disclaimer
* Terms like “nano,” “graphene,” “ceramic,” “ionic,” or “polymer” or any chemical names are used solely for:
- Illustrative and marketing purposes only
- Not claims of medical, clinical, ISO, or certified eco/organic status
- Not intended to represent patented technology, regulatory certification, medical efficacy, therapeutic performance, or independent third-party validation unless expressly stated
❌ No Warranty – No Performance Guarantee
Smarticon disclaims all warranties—express or implied—on:
- Surface compatibility, long-term performance, or specific outcomes
- Usage in weather-prone or variable environmental zones
- Eco/medical/industrial-grade assumptions
Smarticon is not liable for:
- Improper use, overuse, third-party chemical mixes, or ignoring PPE/patch tests and **\***SOP
🛡️ Final Acceptance of Responsibility – Supersedes All Other Terms
By engaging with Smarticon products, all users—buyers, sellers, distributors—irrevocably accept:
- Full and final responsibility for usage
- Acknowledge having voluntarily selected the product after reviewing the information made available by Smarticon.
- Waiver of any future claims, disputes, or legal actions
- Entire risk of use rests with the user
- Total indemnity to Smarticon for any known or unknown issues
This clause overrides all prior claims, verbal discussions, or marketing expectations.
📜 Binding Enforcement & Legal Venue
🏛️ Legal Jurisdiction – Vashi, Navi Mumbai, India (Only)
All legal matters—civil, criminal, reputational, or commercial—shall fall under exclusive jurisdiction of Vashi courts only.
No other court, forum, or authority—domestic or international—shall have standing.
If Smarticon is proven not liable in any legal action (false claims, defamation, etc.), the initiating party will:
- Bear full legal and financial costs
- Cover all consultancy, litigation, and penalty expenses
- Be obligated to issue retractions, where applicable
By interacting with Smarticon products, every entity—user, buyer, reviewer, reseller—unconditionally:
- Accepts this clause
- Waives rights to any other jurisdiction
- Acknowledges that Smarticon's rights, protections, limitations of liability, and remedies shall be governed by these Terms & Conditions and applicable law.
✅ Final Brand Sign-Off – Universal Default for All SKUs
🙏 Thank You for Choosing Smarticon
We’re committed to innovation, safety, and precision. Every formulation is made with care to ensure performance and protection.
Please follow all *SOPs and apply products responsibly.
Smarticon – Innovates to Solve
“Smart Chemistry | Strong Surfaces | Superior Outcomes”
